To buy a replacement watch band, measure the gap between the lugs at the case in millimeters. Then check how the band attaches and how much length you need. A strap that matches the width can still be the wrong shape for the case or too short for your wrist.
Measure the opening where the strap meets the case
- Set the watch face down on a soft cloth. Find the two lugs holding one end of the strap.
- Measure from the inside face of one lug to the inside face of the other. Keep a millimeter ruler or caliper straight across the gap. Avoid scratching the case with metal caliper jaws.
- Write down the exact width. If you read 21 mm, order a confirmed 21 mm fit. A 20 mm strap can leave a gap, and a 22 mm strap may bind.
A stamp on the underside of an old strap is a useful cross-check. Measure at the case end, since many straps taper toward the buckle. A listing that says 24/22 mm usually means 24 mm at the case and 22 mm at the buckle. Confirm how the seller labels the numbers if you plan to reuse your old buckle. Timex’s watch band size guide shows where to measure.
Check the spring bars and end shape
Look underneath the case. A straight strap held by a removable spring bar often has more replacement options. A curved end, a fitted bracelet, or an integrated strap may need a model-specific part even at the same width. Check the pin or bar type too. If you cannot see how the original comes off, take the watch to a repair shop before applying pressure.
Match the length to a strap that already fits
If your old two-piece strap is comfortable, measure the short and long pieces separately without including the buckle. Note which hole you use. A fit near the middle of the hole range leaves room to loosen the band in warm weather. A replacement listed as short or regular can vary by seller, so compare the actual lengths in millimeters.
Read the product dimensions in the right units
The Meridian CUR208 lists a leather strap with a 2.4 cm band width, which is 24 mm. The Traverse CUR148 lists a leather band with a pin buckle and a 24 cm band dimension. That centimeter figure is not a 24 mm lug measurement. On either watch, measure the actual opening and confirm the attachment type before buying a replacement.